Buying in bulk? Request for quote here.
OSHA defines the breathing zone as a ten inch radius around the workers nose and mouth, and requires that worker exposure monitoring air samples be collected in the breathing zone. Air sampling filters may be attached to the collar or lapel.? Traditionally this means only a single gas monitor would be small enough for a worker to practically wear a gas monitor ?In the breathing zone?. Now there is a 4 gas monitor smaller than many single gas monitors.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
The GX-3R is the worlds smallest 4 gas monitor weighing only 3.52 ounces and can comfortably be clipped within a worker?s breathing zone (2.2? W x 2.55? H x 1.02? D). It simultaneously monitors and displays LEL combustibles, O2, CO (Hydrogen compensated CO also available), and H2S.
The GX-3R represents the latest evolution of gas detection technology utilizing a new generation of micro sensors. The LEL sensor has a unique design with two active filaments in one sensor to increase it?s resistance to silicone poisoning. If one filament gets poisoned the second filament takes over. The new O2 sensor is electrochemical with a 3 to 5 year life span.? H2S and CO are now available in a combo micro sensor.??
Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it?s 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.
OSHA defines the breathing zone as a ten inch radius around the worker?s nose and mouth, and requires that worker exposure monitoring air samples be collected in the breathing zone. Air sampling filters may be attached to the collar or lapel.? Traditionally this means only a single gas monitor would be small enough for a worker to practically wear a gas monitor ?In the breathing zone?. Now there is a 4 gas monitor smaller than many single gas monitors.
Beacon 3200 Controller marine signaling controller designed to manage and operate beacon or warning light systems. It provides reliable control, easy operation, and integration with navigational safety equipment, ensuring effective visual signaling for vessels, offshore platforms, or safety installations.
VOC 205 handheld VOC gas detector adopts PID sensor module with wide range, high resolution, built-in temperature compensation and long service life to ensure the accuracy and stability of gas concentration detection.
XT-OPGD1000II / XT-OPGD1000II PRO open path gas detector is manufactured using high-performance photosensitive detectors and micro-controllers, combined with advanced SMD technology. It has good repeatability and temperature and humidity characteristics, as well as long service life and easy operation.
FRLD200 PTZ scanning laser Methane detector is an area-detection product outdoor use. By adopting high-performance and large-light-surface photosensitive optics and micro-control technology, combined with sophisticated SMD technology, this equipment has good repeatability, lower influence by temperature and humidity, long lifespan, easy-to-operate and other advantages.
GTQ-WD6200 fixed gas detector is designed for industrial use. By adopting high-performance gas sensor and MCU technology, combined with sophisticated SMT manufacturing process, this detector has good repeatability, high accuracy and long lifespan.
E410 / E410P is mainly used in the fields of petroleum, petrochemical, chemical, food, pharmaceutical, emergency rescue, etc. It can achieve the simultaneous detection of 1-5 gases. The product supports Bluetooth (optional) and 4G (optional) wireless functions, and remote monitoring provides stronger security for on-site workers. Adopting 2 different sampling methods (natural diffusion and built-in pump suction), it can meet customers' different scenario requirements such as daily inspections and confined spaces.
E6000 is a multi-gas detector up to measure the concentrations of 6 gases simultaneously. It adopts interchangeable smart sensor modules, easy to replace the sensors and maintenance. It can combine various gases: O2, toxic gases, combustible gases., convenient for the workers to monitor the gas environment in working site. Send alarms when exceeding gas concentration is detected, protesting the workers from danger caused by O2 deficiency, toxicity and explosion
The GX-6100 is a powerful hand-held instrument capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6100 has 2 additional smart channels that accept PID, PPM, IR or super toxic sensors.
JL269 is an industrial type portable gas leakage detector with simple operation, fast response and wide measuring range. With flexible goose-neck, it is easy to use and carry. It is specially made to measure the leakage of natural gas, LPG, H2 etc. combustible gases.
BX616 is a united gas detector measuring four (4) major gases, which result the most of the industrial accidents, to protect the disasters caused by the O2 deficiency, toxic gas poisoning and combustible gas explosion. It measures continuously four gases O2, CO, H2S and combustible gas (CH4), and displays their concentrations. Once the risk occurs, it also raises the alarm (visual, audible and vibrative).
A cost-effective single-gas detector with a superior lifespan
Designed for superior lifespan and high performance, with patented sensors that operate for over two years, the ALTAIR Single-Gas Detector is the smart choice for market-leading, cost-effective gas monitors. These units feature sensor options for carbon monoxide, hydrogen sulfide, and oxygen, coupled with LED/audible/vibrating alarms. Superior dust/water protection, high RFI resistance, and one-button operation provide heightened safety, plus increased durability and ease-of-use.
M2A-XL Stand Alone Transmitter is a self-contained marine transmitter designed for reliable radio communication or signaling without the need for external control units. It offers stand-alone operation, robust performance, and ease of installation, making it suitable for marine, safety, and emergency applications where independent transmission capability is required.
CXF is a fixed flammable gas detector for industrial and commercial purposes, which is a stand-alone detector. The detector is mainly used in small restaurants, shopping malls, underground integrated pipe corridors and other environments where gas may leak. When the gas concentration in the environment exceeds the set concentration, it will alarm through the indicator light and buzzer, and drive the solenoid valve at the same time, fans and other equipment to protect the personal and property safety of users
MSA ALTAIR 5X Gas Detector measures up to 6 gases including natural gas and is now available with a PID Detector
The ALTAIR 5X Gas Detector is capable of measuring up to 6 gases simultaneously and is now available with integrated PID sensor for VOC detection. Driven by advanced MSA XCell? Sensor Technology, the ALTAIR 5X Gas Detector delivers faster response time, better stability, accuracy, longer service life, and cost savings over the life of the instrument.
VOCScan800 is newly developed PID type VOC detector. It has built-in self-cleaning and self-zeroing functions and can be used to detect a wide range of volatile organic gases (VOCs).
GTYQ-WD6200IRII Fixed Gas Detector is designed for detecting flammable gas. It features a double beam IR sensor that effectively reduce the zero drift to the minimum, and extends the maintenance intervals. The detector enjoys better gas selectivity, stability, longer life span, and wider application over detector with regular IR sensor. It shows not only the concentration of gas but also diagnostic result of the unit itself through the LCD screen and can be connected to the control panel with a standard 4-20mA analog communication.
OSHA defines the breathing zone as a ten inch radius around the workers nose and mouth, and requires that worker exposure monitoring air samples be collected in the breathing zone. Air sampling filters may be attached to the collar or lapel.? Traditionally this means only a single gas monitor would be small enough for a worker to practically wear a gas monitor ?In the breathing zone?. Now there is a 4 gas monitor smaller than many single gas monitors.
