Buying in bulk? Request for quote here.
Safer than solenoid testers and fully compliant with NFPA 70E, (when used properly per Article 110.4 Use of Equipment (A) Test Instruments and Equipment), the T+Pro helps electricians and technicians work safer by indicating the presence of voltage, even when the batteries are dead. Additional functionality, such as a GFCI trip, easy to read LCD screen, resistance measurement up to 9.99 k?, and a built-in flashlight make the T+Pro the first voltage tester that electricians reach for.
The Fluke T+Pro Electrical Tester indicated AC/DC voltage in three different ways:
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Temperature
Operating: -10?C to 55?C (14?F to 131?F)
Storage:? -30?C to 60?C (-22?F to 140?F)
Relative Humidity
90%: 0?C to 30?C (32?F to 86?F)
75%: 30?C to 40?C (86?F to 104?F)
45%: 40?C to 50?C (104?F to 122?F)
Altitude
Operating: 2,000 m (approx. 6,561.6 ft)
Storage: 10,000 m (approx. 32,808.4 ft)
Battery Type/Life: AAA (2); 40 hours
Shock, Vibration: Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument
Safety: ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1 Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV, Compliance to NFPA 70E1
AC Bandwidth: 45 Hz to 66 Hz
Maximum Working Voltage: 1000 V AC/DC
Maximum Measurable Voltage: 600 V AC/DC
Duty Cycle: Indefinitely for voltages up to 240 V
For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off
For voltages above 240 V the tester must connect to a voltage source only for a MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s
Voltage Hazard LED: LEDs turn on at voltages > 30 V AC/DC ?35%
LED Voltage Indication Levels: 12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V
LEDs: LEDs turn on between 90% and 100% of the indicated voltage on the LED, except for the 12 V LED which turns on between 50% and 100%
LCD Accuracy
AC voltage: ?(3% rdg + 2 digits)
DC voltage: ?(2% rdg + 2 digits)
Resistance: ?(5% rdg + 3 digits)
LCD Resolution: 0.1 V for voltages < 50 V, 1 V for voltages >= 50 V
0.01 k? for resistance measurement
GFCI Test Current: 100 V - 150 V @ 6 mA - 9 mA AC, 150 V - 240 V < 12 mA
Standard Input Test Current: < 5 mA
Size (H x W x L) : 1.3 x 2.15 x 7.6 in (3.3 x 5.46 x 19.3 cm )
Weight: 9.9 oz (0.28 kg)
Lubricating Grease developed for plastic components
?
Product Sizes
1 kg can - 10 per carton
16 kg pail
?
NLGI Grade 1 - PAO based grease with a base oil viscosity of 1050 cSt at 40 C, lithium thickened, with no solid lubricants.
Upmarket range of everyday safety footwear at an affordable price. Eye catching design with orange trims and full safety specification with steel toecap and midsole, antistatic and slip resistant. Complete with extra padding in heel area for abrasion resistance.
The A652 from the CS Collection deliver high-performance protection with a Cut Level E rating and a fine 21 gauge liner for exceptional comfort and dexterity. They feature a nitrile foam coating for a strong, reliable grip, a reinforced thumb crotch for added durability, and are touchscreen compatible for seamless device use.
Optimal eye protection for a wide range of applications: The soft component is moulded straight onto the lens and keeps dust and liquid splashes out of the eyes. The innovative uvex x-tended eyeshield adapts perfectly to the facial shape of the wearer for high levels of comfort and protection.
Dual purpose HSE compliant eye wash station.
Wipeable, hard-wearing ABS plastic with illuminated printed instructions; useful if a power cut happens so the station can be located. Dust proof heavy duty cover keeps contents clean. Central Mirror for easy application. Contains easy-to-squeeze bottle with an eye cap, allowing the eye to be irrigated easily and efficiently.
Product Sizes
?
?
Greaselike compound, is a stiff, nonmelting silicone material used primarily as a valve Lubricant and sealer. It will not carbonize at serviceability temperatures; has a very low vapor pressure; and will resist melting or hardening during long exposure to elevated temperatures. It is insoluble in water, methanol, ethanol, glycol, and glycerine; resistant to most aqueous solutions of inorganic salts, dilute acids, and alkalis; and unaffected by most vegetable and mineral oils, many organic compounds, and most common gases.?
Product Sizes
NLGI Grade 3, translucent white, used primarily as a general-purpose valve lubricant with high mechanical shear stability and high temperature range.
More made from less. Crafted with a recycled upper, ECONILA minimizes environmental impact while safeguarding your feet. This metal-free safety shoe features a composite toe cap, a lightweight design and ESD protection. The rubber outsole grants exceptional slip resistance, while resisting oil, fuel, chemicals, and extreme temperatures. Additionally, ECONILA has an extra wide fitting to offer plenty of room for your feet.
?
FRLD200 PTZ scanning laser Methane detector is an area-detection product outdoor use. By adopting high-performance and large-light-surface photosensitive optics and micro-control technology, combined with sophisticated SMD technology, this equipment has good repeatability, lower influence by temperature and humidity, long lifespan, easy-to-operate and other advantages.
British Admiralty Nautical Chart 3288: Nigeria, Bonny River, Ford Point to Port Harcourt is a standard nautical chart. This nautical chart complies with Safety of Life at Sea (SOLAS) regulations and is ideal for professional, commercial and recreational use. Charts within the series consist of a range of scales, useful for passage planning, ocean crossings, coastal navigation and entering port.
Mariners should always use the largest scale nautical chart appropriate to their needs. In particularly busy seaways such as the English Channel, Gulf of Suez and the Malacca and Singapore Straits, the standard nautical charts are supplemented by mariners routeing guides which provide advice on route planning in these complex areas.
Beacon 3200 Controller marine signaling controller designed to manage and operate beacon or warning light systems. It provides reliable control, easy operation, and integration with navigational safety equipment, ensuring effective visual signaling for vessels, offshore platforms, or safety installations.
Unitor FuelPower Soot Remover - Maximize Your Boiler Efficiency Your ultimate solution for maintaining a clean and efficient boiler. By effectively removing soot and ash deposits from your boiler's exhaust system, it extends the intervals between cleanings and ensures optimal performance.
Product number: 779115
Lightweight vented coverall with a great fit and YKK non-sparking spiral zips throughout. Press studs and zippers are covered by fabric on the inside, so nothing but soft protective material comes in contact with your skin. Major seams are double- or triple-stitched and stress points are bar-tacked for strength. Reflective striping applied to shoulders is equal in length on the front and back.
Greaselike silicone coating especially formulated to give electrical insulators long-term resistance to water filming and flashover. Designed to extend service life by maximizing performance in contact with high-voltage corona stress, ultraviolet light, water erosion, and particulate contamination.
?
Product Sizes
4.5 kg pail
22.6 kg pail
NLGI Grade 2-3, charcoal, used primarily as a high voltage insulator coating.
Simple to use
Unique, compact, telescopic handle allows easy extension for safe operation and saves space when stowed in liferafts.
The Handflare MK8 conforms to SOLAS 74 as amended. Designed to withstand exceptional environmental exposure and to perform reliably even after immersion in water. Featuring a telescopic handle with improved grip, making it very compact for stowage. Easily extended for safe handling and operation by pull wire ignitor. Produces hot red flame for 60 seconds at 15000 candela.
Managing a job or worksite can mean needing to maximize safety and comfort while minimizing cost. The 3M? Disposable Protective Coverall 4510 Series helps protect your workers from certain light liquid splashes and hazardous dusts while enhancing movement and comfort. These coveralls provide reliable protection and performance and are a cost-effective way to protect your workers on the job.
Safer than solenoid testers and fully compliant with NFPA 70E, (when used properly per Article 110.4 Use of Equipment (A) Test Instruments and Equipment), the T+Pro helps electricians and technicians work safer by indicating the presence of voltage, even when the batteries are dead. Additional functionality, such as a GFCI trip, easy to read LCD screen, resistance measurement up to 9.99 k?, and a built-in flashlight make the T+Pro the first voltage tester that electricians reach for.
The Fluke T+Pro Electrical Tester indicated AC/DC voltage in three different ways:
